ProForm Crosswalk 380x English Manual - Page 12
How To Use A Workout Program
View all ProForm Crosswalk 380x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO USE A WORKOUT PROGRAM 1 Insert the key into the console. See HOW TO TURN ON THE POWER on 10. 2 Select one of the workout programs. When the key is inserted, the manual mode will be selected. To select a workout program, press the Mode button repeatedly until the Walker indicator or the Runner indicator lights. When a workout program is selected, the maximum speed setting for the program will flash in the Speed display for a few seconds. The Time display will show how long the program will last. Note: The profiles beside the Walker and Runner indicators show how the speed of the treadmill will change during the workout programs. 3 Press the Start button or the Speed v button to start the program. A moment after the button is pressed, the treadmill will automatically adjust to the first speed setting for the program. Hold the handrails and begin walking. Each program is divided into several time periods of different lengths. One speed setting is programmed for each period. (The same speed setting may be programmed for consecutive periods.) When only three seconds remain in the first period of the program, a series of tones will sound. If the speed of the treadmill is about to change, the Speed display will flash to alert you, and then the treadmill will automatically adjust to the speed setting for the second period. The program will continue in this way until no time remains in the Time display. The walking belt will then slow to a stop. During the program, the incline of the treadmill can be adjusted with the Incline buttons. If the speed setting for the current period is too high or too low, you can manually override the setting by pressing the Speed buttons on the console. However, when the next period begins, the treadmill will adjust to the next speed setting for the program. To stop the program, press the Stop button. The Time display will begin to flash. To restart the program, press the Start button or the Speed v button. To end the program, press the Stop button, remove the key, and then reinsert the key. 4 Follow your progress with the LED track and the four displays. Refer to step 5 on page 10. 5 Measure your heart rate if desired. See step 6 on page 11. 6 When the program ends, remove the key from the console. When the program ends, make sure that the treadmill is at the lowest incline level. Next, remove the key from the console and put it in a secure place. When you are finished using the treadmill, move the on/off circuit breaker near the power cord to the off position. 12