ProForm Crosswalk Advanced 525 S Canadian English Manual - Page 13
How To Use The Manual Mode
View all ProForm Crosswalk Advanced 525 S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HOW TO TURN ON THE POWER 1 Plug in the power cord (see page 11). 2 Stand on the foot rails of the treadmill. 3 Find the clip attached to the key (see the drawing on page 12), and slide the clip onto the waistband of your clothes. Next, insert the key into the console. After a moment, the displays and various indicators will light. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the console, adjust the position of the clip. HOW TO USE THE MANUAL MODE 1 Insert the key into the console. See HOW TO TURN ON THE POWER above. 2 Select the manual mode. When the key is inserted, the manual mode will be selected and the Manual indicator will light. If a program has been selected, press the Program button repeatedly to reselect the manual mode. 3 Start the walking belt. To start the walking belt, press the Start button, the Speed + button, or one of the ten Quick Speed buttons. If the Start button or the Speed + button is pressed, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed + and - buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph. If one of the Quick Speed buttons is pressed, the walking belt will gradually increase in speed until it reaches the selected speed setting. Note: The console can display speed and distance in either miles or kilometers (see SPEED DISPLAY on page 14). For simplicity, all instructions in this section refer to miles. To stop the walking belt, press the Stop button. The Time display will begin to flash. To restart the walking belt, press the Start button or the Speed + button. Note: The first time you use the treadmill, periodically inspect the alignment of the walking belt, and align it if necessary (see page 25). 4 Change the incline of the treadmill as desired. To change the incline of the treadmill, press either of the Power Incline buttons until the desired incline level is reached. 5 Follow your progress with the LED track and the displays. The LED Track-When the manual mode or the iFIT.com mode is selected, the LED display will show a track representing 1/4 mile. As you exercise, the indicators around the track will light in succession until you have completed 1/4 mile. A new lap will then begin. Calories/Pulse display-This display shows the approximate numbers of calories you have burned. The display will also show your heart rate when you use the pulse sensor (see step 6 on page 14). 13