ProForm Crosswalk Advanced 525 S Canadian English Manual - Page 6
Assembly
View all ProForm Crosswalk Advanced 525 S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3/4" Tek Screw (58)-8 ASSEMBLY 1/2" Screw (119)-1 Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included allen wrenches and your own phillips screwdriver , rubber mallet , and adjustable wrench . For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first check to see if it has been preassembled. If a part is missing, call toll-free 1-888-936-4266. 2" Screw (117)-2 1" Tek Screw (39)-6 Handrail Washer (100)-2 Silver Ground Screw (75)-1 Plastic Spacer (115)-2 3/4" Screw (2)-4 1/2" Screw (48)-3 Wheel Bolt (64)-2 Wheel Nut (32)-2 Handrail Bolt (37)-2 6 1. Make sure that the power cord is unplugged. 1 69 With the help of another person, carefully raise the Uprights (69) to the vertical position. Identify the Right Extension Leg (109), which has a Ball Joint (63) in the position shown. Insert the Right Extension Leg (109) into the base of the Uprights (69) as shown. Note: It may be helpful to tip the Uprights as you insert the Extension Leg. Insert the Left Extension Leg (not shown) in the same way. 6 69 109 63