ProForm Crosswalk Zxt4 Treadmill English Manual - Page 13
Attach the Right Upper Body Arm 79 in
View all ProForm Crosswalk Zxt4 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
12. Attach the Latch Housing (67) to the Left Upright (66) with two #10 x 3/4" Screws (8); start both Screws, and then tighten them. Make sure that the large hole in the Latch Housing is on the indicated side. Locate the Latch Pin Assembly (68). Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two collars, place one on each side of the spring.) Insert the pin into the Latch Housing (67). Then, tighten the knob onto the pin. 12 68 67 Knob 8 Large Hole Spring Collar Pin 66 13. Identify the Left and Right Upper Body Arms (78, 79). Orient and position the Left Upper Body Arm (78) as shown. Attach the Left Upper Body Arm to the Left Upright (66) with two 1/4" x 3 1/2" Screws (77), two 1/4" Star Washers (75), and two 3/8" Star Washers (3) as shown. Do not overtighten the Screws. Attach the Right Upper Body Arm (79) in the same way. 13 66 75 3 77 78 75 77 79 3 14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 22). 13