ProForm Performance 350i Uk Manual - Page 10
Be careful not to pinch the Upright Wire, do not fully tighten the, Screws yet., Attach the Left
View all ProForm Performance 350i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Identify the Right Handrail (64). Have a second person hold the Right Handrail near the Right 6 Upright (76). Route the Upright Wire (63) into the bottom of the Right Handrail (64) and out of the hole in the Right Handrail. Be careful not to pinch the Upright Wire (63). Insert and partially tighten a 5/16" x 3/4" Screw (5) with a 5/16" Star Washer (6) into the Right Upright (76) and the Right Handrail (64). Then, partially tighten a 5/16" x 3" Screw (7) with a 5/16" Star Washer into the Right Handrail and the Right Upright; do not fully tighten the Screws yet. Attach the Left Handrail (not shown) in the same way. Note: There are no wires on the left side. 7 6 64 63 76 6 5 7. Set the console assembly face down on a soft surface to avoid scratching the console 7 assembly. Remove and discard the two indicated screws (C). Then, remove the Console Crossbar (61). Console Assembly C C 61 10