ProForm Performance 350i Uk Manual - Page 12
If You Do Not Connect The Con
View all ProForm Performance 350i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. With the help of a second person, hold the console assembly near the Right Handrail (64). See the inset drawing. Connect the Upright Wire (63) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Connect the console ground wire to the ground wire on the Console Crossbar (61). 10 Console Assembly Console Wire 63 64 Ground Wires Wire 61 Tie Console Wire 63 11. Insert the wires into the Right Handrail (64) through the indicated hole as you set the console assembly on the Left and Right Uprights (66, 76). Make sure that no wires are pinched. Attach the console assembly with ten #8 x 3/4" Screws (4); start all ten Screws, and then tighten them. Do not overtighten the Screws. See step 5. Firmly tighten the six 3/8" x 3 1/4" Screws (2). 11 Wires Hole Console Assembly Wires 4 4 64 4 76 4 4 66 12