ProForm Performance 350i Uk Manual - Page 14

14. Remove the 5/16" Nut (80) and the 5/16" x 1 3/4" Bolt (79) from the bracket on the Latch Crossbar (67). Align the upper end of the Storage Latch (68) with the bracket on the Latch Crossbar (67), and insert the 5/16" x 1 3/4" Bolt (79) through the bracket and the Storage Latch. This will push a spacer (F) out of the Storage Latch; discard the spacer. Next, tighten the 5/16" Nut (80) onto the 5/16" x 1 3/4" Bolt (79). Do not overtighten the Nut; the Storage Latch (68) must be able to pivot. Then, lower the Frame (38) (see HOW TO LOWER THE TREADMILL FOR USE on page 23). 14 38 80 F 67 79 68 15. A ttach the Tablet Holder (92) with four #8 x 1/2" Machine Screws (91); start all four Screws, 15 and then tighten them. Do not overtighten the Screws. 92 91 91 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 25 and 26). Note: Extra hardware may be included. 14