ProForm Performance 400i Instruction Manual - Page 14

14. Raise the Frame (56) to the upright position. IMPORTANT: Do not raise the Frame past the 14 vertical position. Have a second person hold the Frame until step 16 is completed. Remove the two 5/16" x 3/4" Screws (6) from the Latch Crossbar (114). K Orient the Latch Crossbar (114) as shown. Make sure that the "This side toward belt" sticker (J) is facing the treadmill. Attach the Latch Crossbar to the brackets (K) on the Frame (56) with two 5/16" x 3/4" Screws (6) that you just removed and two 5/16" Star Washers (11). 11 6 56 J 114 K 11 6 15. Remove the 5/16" Nut (34) and the 5/16" x 1 3/4" Bolt (41) from the bracket on the Base (94). 15 Next, orient the Storage Latch (52) as shown. L Attach the lower end of the Storage Latch (52) to the bracket on the Base (94) with the 5/16" x 1 3/4" Bolt (41) and the 5/16" Nut (34). 52 Then, raise the Storage Latch (52) to a vertical position, and remove the tie (L). 34 94 41 14