ProForm Performance 900i Treadmill English Manual - Page 35
Unplug The Power
View all ProForm Performance 900i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. b SYMPTOM: The iFit mode does not function correctly a. If the iFit mode is not functioning correctly, make sure that the incline trainer has the most current firmware available (see page 29). SYMPTOM: The treadmill will not connect to the wireless network a. Make sure that the wireless settings on the console are correct (see page 30). b. Make sure that the settings for your wireless network are correct. c. If you still have questions, see the front cover of this manual. 35