ProForm Pfevel71216 Instruction Manual - Page 10

8. While a second person holds the Console Bracket (4) near the Frame (1), connect the 8 wires on the Console to the Main Wire (115) and to the Pulse Wire (117). Tip: Avoid pinching the wires. Attach the Console Bracket (4) to the Frame (1) with two M8 x 86mm Screws (109) and two M8 x 15mm Screws (96); start all the Screws, and then tighten them. 4 96 1 Avoid pinching the wires 117 109 115 96 9. Identify the Right and Left Handlebars (10, 11). Make sure that the Pedals (not shown) are level. Attach the Right Handlebar (10) to the Right Handlebar Arm (15) with three M8 x 25mm Screws (105); start all the Screws, and then tighten them. Tip: It may be helpful to rotate the Right Handlebar for better access to tighten the Screws. Attach the Left Handlebar (11) in the same way. 9 11 15 10 105 10