ProForm Pfevel71216 Instruction Manual - Page 11
start all the Flat Head Screws, and then tighten them., See the inset drawing., Repeat this step
 |
View all ProForm Pfevel71216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Identify the Rear and Front Pivot Covers (65, 66). 10 Press a set of Rear and Front Pivot Covers (65, 66) together around the Right Handlebar (10) near the bend (A). Then, attach them to each other with two M4 x 22mm Screws (107). See the inset drawing. Slide the Rear and Front Pivot Covers (65, 66) toward the Shield Cover (12). Attach the Front Pivot Cover to the Right Handlebar (10) with an M4 x 22mm Screw (107). Repeat this step on the other side of the trainer. 10 66 65 A 107 65 12 10 66 107 11. Attach the Front Cover (52) to the Left and Right Shields (50, 51) with six M4 x 16mm Flat Head 11 Screws (101); start all the Flat Head Screws, and then tighten them. 101 52 101 50, 51 11
-
1 -
2
-
3
-
4
-
5
-
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
11
52
101
101
50, 51
11. Attach the Front Cover (52) to the Left and Right
Shields (50, 51) with six M4 x 16mm Flat Head
Screws (101);
start all the Flat Head Screws,
and then tighten them.
11
10
10. Identify the Rear and Front Pivot Covers
(65, 66).
Press a set of Rear and Front Pivot Covers
(65, 66) together around the Right Handlebar
(10) near the bend (A). Then, attach them to
each other with two M4 x 22mm Screws (107).
See the inset drawing.
Slide the Rear and Front
Pivot Covers (65, 66) toward the Shield Cover
(12). Attach the Front Pivot Cover to the Right
Handlebar (10) with an M4 x 22mm Screw (107).
Repeat this step on the other side of the
trainer.
66
A
65
107
10
10
66
12
107
65