ProForm Power 1080 Treadmill English Manual - Page 11
tighten the Screws yet.
View all ProForm Power 1080 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5. Hold the Left Upright (89) against the Base (94). Be careful not to pinch the Upright Wire (81) or the base ground wire (A). Insert two 3/8" x 1 1/4" Screws (8) with two 3/8" Star Washers (13) and two 3/8" x 2 3/4" Screws (7) into the Left Upright. Partially tighten the 3/8" x 2 3/4" Screws (7) and the 3/8" x 1 1/4" Screws (8) until the heads of the Screws touch the Left Upright (89); do not fully tighten the Screws yet. Note: Use the short hex key. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 5 89 7 13 A 8 13 94 6. Identify the Left Base Cover (82) and the Right Base Cover (83). Slide the Left Base Cover onto 6 the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Identify the Left Upright Cover (79) and the Right Upright Cover (80). Slide the Left Upright Cover onto the Left Upright (89). Slide the Right Upright 89 Cover onto the Right Upright (90). 79 81 80 90 83 82 11