ProForm Power 1080 Treadmill English Manual - Page 16

17. IMPORTANT: See page 18 and plug in the power cord. Next, see page 20 and turn on 17 the power. Then, see step 1 on page 27 and step 2 on page 29 to access the maintenance mode. Then, follow step 4 on page 29 to calibrate the incline system of the treadmill. When the frame stops moving, remove the key from the console and unplug the power cord. IMPORTANT: Make sure to follow all instructions in this step. 18. IMPORTANT: Before you begin this step, make sure that you have read and followed 18 all the instructions in step 17. Raise the Frame (56) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (53) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (53) to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12). Attach the upper end of the Storage Latch (53) to the bracket on the Frame (56) with a 3/8" x 1 3/4" Bolt (6) and a 3/8" Nut (12). 56 12 6 53 Latch Knob Large Barrel 94 12 3 16