ProForm Power 995 Treadmill English Manual - Page 10
the #10 x 3/4 Flat Head Screws 63.
View all ProForm Power 995 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7. Attach the Left Handrail (88) to the Left Upright 7 (89) with two 5/16" x 1" Screws (5), two 5/16" Star Washers (11), and a 5/16" x 1 1/4" Bolt (4). Do not fully tighten the Screws and Bolt yet. 4 11 87 Attach the Right Handrail (87) in the same way. 11 5 5 4 88 89 8. Set the console assembly face down on a soft 8 surface to avoid scratching the console assem- bly. Remove and discard the two screws (A). Then, lift off the Crossbar (93). Console Assembly A 93 9. IMPORTANT: To avoid damaging the 9 Crossbar (93), do not use power tools and do not overtighten the #10 x 3/4" Screws (9) or the #10 x 3/4" Flat Head Screws (63). Orient the Crossbar (93) as shown. Attach the Crossbar to the Handrails (87, 88) with two #10 x 3/4" Flat Head Screws (63), two #10 x 3/4" Screws (9), and two 1/4" Star Washers (35) as shown. Start all four Screws, and then tighten them. 63 93 9 35 88 9 63 35 87 10