ProForm Power 995 Treadmill English Manual - Page 8

3. Identify the Left Upright (89). Have a second person hold the Left Upright near the Base (94). 3 See the inset drawing. Tie the wire tie in the Left Upright (89) securely around the end of the Upright Wire (81). Then, pull the other end of the wire tie until the Upright Wire is routed through the Left Upright. 89 81 89 Wire Tie Wire Tie 81 81 94 4. Hold the Left Upright (89) against the Base (94). 4 Be careful not to pinch the Upright Wire (81). Insert two 3/8" x 1 1/4" Screws (8) with two 3/8" Star Washers (13) and two 3/8" x 2 3/4" Screws (7) into the Left Upright. Partially tighten the 3/8" x 2 3/4" Screws (7) and the 3/8" x 1 1/4" Screws (8) until the heads of the Screws touch the Left Upright (89); do not fully tighten the Screws yet. Note: It may be helpful to use the short hex key on the Screw shown. Attach the Right Upright (not shown) in the same way. Note: There are no wires on the right side. 81 89 Hex 7 Key 13 8 13 94 8