ProForm Power 995 Treadmill English Manual - Page 11

If You Do Not Connect The Con

Get ProForm Power 995 Treadmill PDF manuals and user guides View all ProForm Power 995 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

10. With the help of a second person, hold the console assembly near the Left Handrail (88). 10 Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Wire 81 Console Assembly Console Wire 81 Wire Tie 88 11. Set the console assembly on the Left Handrail (88) and the Right Handrail (87). Be careful not 11 to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1) and four 1/4" x 1/2" Screws (36) with four 5/16" Flat Washers (68) and four 1/4" Star Washers (35) as shown. Start all ten Screws, 35 and then tighten them. 68 See step 7. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Bolts (4). 36 87 1 1 Console Assembly 35 88 68 36 1 1 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
11
10.
With the help of a second person, hold the con-
sole assembly near the Left Handrail (88).
Connect the Upright Wire (81) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the
Upright Wire.
Console
Assembly
Console
Wire
Wire
Tie
88
81
81
Console
Wire
10
11.
Set the console assembly on the Left Handrail
(88) and the Right Handrail (87).
Be careful not
to pinch any wires.
Insert the excess Upright
Wire (not shown) into the Left Handrail.
Attach the console assembly with six #8 x 1/2"
Screws (1) and four 1/4" x 1/2" Screws (36) with
four 5/16" Flat Washers (68) and four 1/4" Star
Washers (35) as shown.
Start all ten Screws,
and then tighten them.
See step 7.
Fully tighten the four 5/16" x 1"
Screws (5) and the two 5/16" x 1 1/4" Bolts (4).
35
88
1
11
Console
Assembly
1
87
36
1
1
36
35
68
68