ProForm Pro 9000 Treadmill English Manual - Page 10
Hold the Right Upright 81 against the Frame
View all ProForm Pro 9000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2. Make sure that the power cord is unplugged. 2 Identify the Right Upright (81). Have a second person hold the Right Upright near the Frame (51). See the inset drawing. Tie the wire tie in the Right Upright (81) securely around the end of the Upright Wire (78). Then, pull the other end of the wire tie until the Upright Wire is routed through the Right Upright. 3. Hold the Right Upright (81) against the Frame (51). Be careful not to pinch the wires. Start a 3 3/8" x 4 1/4" Screw (2) with a 3/8" Star Washer (9) into the Right Upright and into the Frame; do not fully tighten the Screw yet. Insert a 3/8" x 2 3/4" Bolt (1) with two 3/8" Flat Washers (29) and a 3/8" Star Washer (9) into the Frame (51). Tighten a 3/8" Nut (8) onto the end of the Bolt; do not fully tighten the Bolt yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 78 Wire Tie 81 51 81 Wire 78 Tie 81 8 51 9 2 29 1 10