ProForm Pro 9000 Treadmill English Manual - Page 12
Start all four Screws, and, then tighten them. - assembly
View all ProForm Pro 9000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
6. Remove and discard the four screws (D). Next, lift off the Pulse Bar Bottom (77). Remove and discard the four 5/16" x 5/8" Screws (3). 6 Console Assembly D D 3 3 D 77 7. Slide the Pulse Bar Bottom (77) onto the right and left handrail assemblies (A, B) as far as pos- 7 sible in the direction shown. If necessary, loosen 7 the 3/8" x 2 3/4" Bolts (1) and the 3/8" x 4 1/4" Screws (2) (only one side is shown). Attach the Pulse Bar Bottom (77) with four #10 x 3/4" Screws (7). Start all four Screws, and then tighten them. B Remove the wire tie from the Upright Wire (78). 77 7 A 78 Wire Tie 1 2 12
12
7.
Slide the Pulse Bar Bottom (77) onto the right
and left handrail assemblies (A, B) as far as pos-
sible in the direction shown. If necessary, loosen
the 3/8" x 2 3/4" Bolts (1) and the 3/8" x 4 1/4"
Screws (2) (only one side is shown).
Attach the Pulse Bar Bottom (77) with four #10
x 3/4" Screws (7).
Start all four Screws, and
then tighten them.
Remove the wire tie from the Upright Wire (78).
7
7
7
77
B
A
6.
Remove and discard the four screws (D). Next,
lift off the Pulse Bar Bottom (77).
Remove and discard the four 5/16" x 5/8"
Screws (3).
D
6
D
77
Console
Assembly
D
3
3
78
1
2
Wire
Tie