ProForm Pro 9000 Treadmill English Manual - Page 11
Do not overtighten the Screws., Do not tighten the Screws, Attach the left handrail assembly B as,
View all ProForm Pro 9000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
4. Hold the right handrail assembly (A) near the Right Upright (81). Insert the Upright Wire (78) into the large hole in the bottom of the right handrail, and pull it out of the front of the right handrail. Set the right handrail assembly (A) onto the Right Upright (81), and attach the right handrail with two 5/16" x 5/8" Screws (3) and two 5/16" Star Washers (10). Do not tighten the Screws yet. Attach the left handrail assembly (B) as described above. Note: There is not a wire in the Left Upright (80). Remove and discard the four indicated screws (C) from the right and left handrail assemblies (A, B). 4 C 10 3 B 10 3 80 78 A C 10 3 10 3 81 5. Set the console assembly face-down on a soft surface to avoid scratching the console. 5 Attach the Left and Right Trays (97, 98) to the console assembly with six #8 x 1/2" Screws (4). 4 Do not overtighten the Screws. 97 4 4 4 98 Console Assembly 11