ProForm Style 4500 Treadmill Uk Manual - Page 6
Assembly
View all ProForm Style 4500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 1/2" Bolt (56)-4 ASSEMBLY 2 3/4" Bolt (47)-4 Star Washer (81)-4 Washer (29)-4 Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials;Hdaonndroatil Washer (11)- dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking be4lt" oBrotlht e(1s2h0ip)-p2ing carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver , adjustable wrench , and needlenose pliers . Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly. M4 x 19mm Tek M5 x 16mm Screw (26)-6 Screw (85)-2 M4.2 x 19mm Screw (10)-6 1/2" Ground Screw (84)-1 M8 x 15mm Bolt (8)-6 M5 Star Washer (7)-2 M8 Star Washer (5)-6 M10 Star Washer (9)-6 M10 Washer (14)-2 M10 Jam Nut (16)-4 M6 Washer (32)-4 M6 Nut (43)-4 M6 x 58mm Bolt (13)-4 M10 x 58mm Bolt (2)-4 M10 x 60mm Patch Bolt (1)-2 1. Make sure that the power cord is unplugged. Have a second person hold the Base (52) in the position shown. Attach six Base Pads (63) to the Base (52) with six M4 x 19mm Tek Screws (26). 1 26 63 26 63 26 63 26 52 63 26 63 Wheel Housing Bolt (13)-4 6