RCA ANT3038XR Owner/User Manual - Page 2
Step 2, Connect the reflector booms to the front, small boom, Step 3, Unfold the rest of the antenna
UPC - 044476071638
View all RCA ANT3038XR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Step 2: Connect the reflector booms to the front (small) boom Find the two reflector booms and the front (or small) boom. The two smaller elements on the reflector booms face away from the small main boom. Fig. 1 Fig. 2 FRONT Locking Tab IMPORTANT: Unfold the elements on each end of the reflector boom so that the front of their locking tabs face towards each other. The remaining locking tabs can be unfolded in either direction. Make sure that all of the elements are perpendicular to the reflector boom. Connect the two reflector booms to the front boom using two of the provided #10 nuts and screws. The reflector booms should be parallel to the smaller boom at this point. (See Fig. 1.) Fig. 2A Main Boom Step 3: Unfold the rest of the antenna Unfold all the other elements on the antenna until they lock into place ensuring that they are flat and parallel to each other. (See Fig. 3.) Fig. 3 2