RCA RCRBB04GZ Owner/User Manual - Page 1

Battery Saver

Your universal remote control saves battery power by

automatically turning off if any key is pressed for more

than 60 seconds. This saves your battery life should

your remote get stuck in a place where the keys remain

depressed, such as between sofa cushions.

Congratulations on your purchase of this 4-device RCA

Universal Remote Control. This remote features a library

of codes with the latest devices of all major brands, with

support for streaming media players as well. The navigation

keys have been redesigned to function seamlessly with the

more sophisticated menu and guide systems found in today’s

home entertainment devices.

RCRBB04GR

Universal Remote Control

Owner’s Manual

Manual del Propietario (parte posterior)

SAVE THIS MANUAL AND THE CODE LISTS!

Remote controls can sometimes lose their programming

when you change the batteries. Make sure you keep the

manual and code lists in a safe place so that you can

reprogram the remote if you need to.

Tip:

This remote is already programmed to operate

most RCA-branded TVs, VCRs, DVD players and satellite

receivers. Just press the corresponding key—DVD•VCR

for a DVD player, TV for a television, SAT•CBL•STRM for a

satellite receiver, DVR•AUX for a DVR.

Your universal remote requires two AAA alkaline batteries

(not included).

To install the batteries:

1.

Press and push the

battery compartment

cover to remove it.

2.

Insert the batteries,

matching the batteries

to the (+) and (–) marks

inside the battery

compartment.

3.

Push the battery cover

back into place.

Battery Precautions:

•

Do not mix old and new batteries.

•

Do not mix alkaline, standard (carbon-zinc) or

rechargeable (nickel-cadmium) batteries.

•

Always remove old, weak or worn-out batteries promptly

and recycle or dispose of them in accordance with Local

and National Regulations.

To use this universal remote with your home entertainment

system, ﬁrst you need to program it to control your devices.

There are four ways you can program the universal remote

to operate your devices. Try them in the order listed here:

•

The

Brand Code Search

searches through the codes

for select brands of devices.

•

The

Direct Code Entry

lets you enter a code from the

accompanying code list for your brand of device.

•

The

Auto Code Search

goes automatically through all

the codes for the device you’re trying to control.

•

The

Manual Code Search

lets you manually go

through all the codes for the device you’re trying to

control.

Brand Code Search

The Brand Code Search goes through only the codes for one

of the select brands listed in the accompanying code list. If

your brand of device is listed, this search can be very quick

and easy.

TIPS:

Each device key is associated with a type

of device—the TV is preset to search for TVs,

SAT•CBL•STRM for satellite receivers, cable boxes

or digital TV converters or streaming media players,

DVD•VCR for DVD players, and DVR•AUX for DVRs. To

program a device key for a different type of device, see

the

Changing a Key’s Device Type

section.

To exit without saving a new code at any point in the

Brand Code Search, press the CLEAR key.

1.

Manually turn on the device you

want to control.

3.

Press and hold the device key you want to program.

While you’re holding down the device key, use your

other hand to press and hold the remote’s POWER key

at the same time.

4.

Wait until the POWER key comes

on and stays on. Then release

both keys.

2.

Find your device’s brand in the

Brand Code list section of the

accompanying code list. Circle

the number for your brand and

keep the list handy.

Code Lists

Lista de Códigos

0

1

2

3

4

5

6

7

8

9

TV

VCR

0

1

2

3

4

5

6

7

8

9

DVD

SAT/CABLE

0

1

2

3

4

5

6

7

8

9

Brand Code List/Lista de Códigos de Marcas

0

1

2

3

4

5

6

7

8

9

Step 1: Install your batteries

Step 2: Program your remote

FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority to

operate this equipment.

Industry Canada Regulatory Information

This class B digital apparatus complies with Canadian ICES-003

Avis d’Industrie Canada

Cet appareil numérique de la classe B est conforme a la nome NMB-

003du Canada

RCA RCRBB04GZ Owner/User Manual - Page 1

RCA RCRBB04GZ Manual

Page 1 highlights