RCA RCRBB04GZ Owner/User Manual - Page 2

4.

When you’ve finished

entering the five-digit code,

keep holding down the

device key and look at the

POWER key.

Is the POWER key on?

YES:

You’re done! You’ve

programmed this device

key.

NO, it blinked four times and turned off:

You have

either entered a code number that is not in the code

lists or missed a step in the code entry procedure. Try

step 3 again.

Testing the Code for Maximum Functionality

1.

Try a variety of the device’s functions with the remote.

If some device features don’t work, go to the next step

to try a different code.

2.

Repeat the Brand Code Search from the beginning.

When the device turns off for the first time, don’t

press the STOP key, which would store the same code.

Instead, with the unit now off, continue to press the

POWER key repeatedly until the unit turns back on.

3.

Once the unit turns back on, you have found another

code that operates the device. Press the STOP key.

4.

Test the key’s functionality again by attempting to

control a variety of the device’s functions. If the code

that has been stored controls the majority of the

device’s functions, programming is complete. If the

code stored does not give maximum functionality, try

another code.

6.

Keep the remote pointed directly

at the front panel of the device you

want to control. Press POWER on

the remote and wait 2 seconds. The

remote is testing a single code for

your device’s brand.

Did your device turn off?

YES:

Press the STOP key to store the code. You’re

done! You’ve programmed this device key.

NO:

Press POWER again. The remote tests the next

code for your brand.

Keep pressing POWER every 2 seconds until your

device turns off. When it does, press STOP.

5.

Look at the number you circled for

your device’s brand code number.

Press that number on the remote

keypad.

NOTES

Throughout the programming of each key, be sure to

keep the remote pointed at the IR sensor of the device

you are currently programming the remote to control.

Test the remote with the device to make sure the

device key is programmed with the correct code for

maximum functionality. If some features don’t work, try

a different code. See the “Testing the Code for Maximum

Functionality” section below for more information.

During the Brand Code Search, the remote ignores

keypresses that aren’t part of the search.

The search times out after two minutes (the POWER key

blinks four times and turns off, and the last programmed

code under that device key is retained).

The POWER key blinks four times and turns off when the

remote has gone through all the codes. The remote exits

the Brand Code Search. If your device hasn’t turned off

yet, try a different search method.

Direct Code Entry

Direct Code Entry lets you enter a code from the

accompanying code list for your brand of device. It’s not as

easy as the other methods, but it’s potentially the fastest

method.

TIP:

Each device key is associated with a type

of device—the TV is preset to search for TVs,

SAT•CBL•STRM for satellite receivers, cable boxes

or digital TV converters or streaming media players,

DVD•VCR for DVD players, and DVR•AUX for DVRs. To

program a device key for a different type of device, see

the

Changing a Key’s Device Type

section.

1.

Manually turn on the device

you want to control.

3.

Press and hold the device key you want to program

(the POWER key comes on).

While you’re holding down the device key, use your

other hand enter the first five-digit code for your brand

in the code list (the POWER key goes off after the first

digit).

2.

Find the Code List that came with

the remote. Locate the section for

the type of device you’re trying to

program, and find your brand in

that section. Circle the codes for

your brand and keep them handy.

Code Lists

Lista de Códigos

0

1

2

3

4

5

6

7

8

9

TV

VCR

0

1

2

3

4

5

6

7

8

9

DVD

SAT/CABLE

0

1

2

3

4

5

6

7

8

9

Brand Code List/Lista de Códigos de Marcas

0

1

2

3

4

5

6

7

8

9

NOTES

Remember to enter the code for future reference in the

box provided in the Code Retrieval section of this manual.

If your brand isn’t listed in the code list, use one of the

Code Search methods to program the remote control.

(Refer to the Auto and Manual Code Search methods.)

If you release the device key any time during the Direct

Code Entry procedure, the POWER key blinks four times,

and the process is exited. The last programmed code

under the device key is retained.

Test the remote with the device to make sure the device

key is programmed with the correct code for maximum

functionality. If some features don’t work, try a different

code in the list.

RCA RCRBB04GZ Owner/User Manual - Page 2

Direct Code Entry - how to program

Page 2 highlights