RCA VR637HF User Guide - Page 20

Chapter 3: On-Screen Menus CHANNELS 1 2 3 4 5 Auto Channel Search Add/Remove Channels Signal Type: CABLE Cable Box Setup VCR Output Channel: 3 Channels Channels tells the VCR where to find channels and stores them in the VCR's channel list. Auto Channel Search Use Auto Channel Search to place all available channels in memory. If you ever change cable or antenna signals, you may need to run the Auto Channel Search feature again. Select one of the three options: Cable TV searches for cable stations. Antenna searches for local broadcast stations. Detect Automatically selects the appropriate input automatically. Note: With Detect Automatically, a strong cable or antenna signal in your area may cause channels to be detected inaccurately. If this should happen, you will need to select either Cable TV or Antenna manually. When scanning is complete, the VCR tunes to the lowest channel available. After completing Auto Channel Search, press the remote control's CH + or - buttons to select active channels. 0 Exit ADD/REMOVE CHANNELS Channel 115 is presently ADDED Add/Remove Channels Your VCR may come with a list of channels preset at the factory. Even though it may come with such a list, you may want to add or delete certain channels. Note: If you use a cable box to view all channels, this step is not necessary. Press CLEAR to remove Press MENU to exit To go to the channel you want to add or remove, use the remote control's CH + or - buttons or enter a specific channel number using the number buttons. To remove a channel from the channel list, press CLEAR. To add a channel to the channel list, press INFO. Note: To view active channels, use the remote control's CH + and buttons. You can also access channels that aren't available in the active channel list by using the remote control's number buttons to enter the specific channel number. Signal Type This feature is useful if your cable signal goes out; it allows you to switch to a regular antenna for alternate television reception. From the Channels menu, choose between Signal Type: Cable or Antenna by pressing the 3 button until the correct signal type is shown. CABLE BOX SETUP Do you use your cable box to receive ALL channels or only SOME channels? 1 ALL channels 2 Only SOME channels 3 Cancel setup Cable Box Setup This setup applies only when all channels are received through a cable box. Cable box setup is explained in detail on page 9. 18 Chapter 3