Reebok 125 Axb Bench English Manual - Page 11

ADJUSTMENT This section explains how to adjust the weight bench. See the EXERCISE GUIDELINES on page 13 for important information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for several exercises. Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent; do not use solvents to clean the weight bench. ADJUSTING THE BACKREST To use the Backrest (8) in the declined position, remove the Backrest Support (14) and lay the 4 Backrest on the Crossbar (2). To use the Backrest (8) in the level position or either of the two inclined positions, set the Backrest Support (14) in a set of brackets on the Uprights (1, 4). 14 8 1 WARNING: When using the Backrest (8) in a level or inclined position, make sure that the pins on the Backrest Support (14) are fully inserted into the holes in the brackets on the Uprights (1, 4). 2 ATTACHING WEIGHTS TO THE LEG LEVER To use the Leg Lever (6), slide the desired weights (not included) onto the Weight Tube (11) and secure them with the Weight Clip (42). WARNING: Do not place more than 50 lbs. (23 kg) on the Weight Tube (11). Always secure weights with the Weight Clip (42). 6 11 42 Weight 11