Reebok 125 Axb Bench English Manual - Page 9
Insert two Pad Tubes 12 into the Leg Lever
 |
View all Reebok 125 Axb Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Insert two Pad Tubes (12) into the Leg Lever (6). Slide two Foam Pads (13) onto each Pad 8 Tube. Then, press two Pad Caps (37) into each Pad Tube. 13 6 37 12 13 13 37 12 37 13 9. Orient the Backrest Frames (7) as shown. Attach the Backrest Frames to the Backrest (8) 9 with four M6 x 35mm Screws (26) and four M6 8 Washers (29). Do not tighten the Screws yet. 7 26 10. Apply grease to an M10 x 190mm Bolt (24). Attach the Backrest Frames (7) to the Frame (3) with the M10 x 190mm Bolt (24), two M10 Washers (40), and an M10 Locknut (32). Do not overtighten the Locknut; the Backrest Frames must pivot easily. See step 9. Tighten the M6 x 35mm Screws (26). 10 32 40 7 3 29 29 26 40 Grease 24 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
 |
 |
9
9.
Orient the Backrest Frames (7) as shown.
Attach the Backrest Frames to the Backrest (8)
with four M6 x 35mm Screws (26) and four M6
Washers (29).
Do not tighten the Screws yet.
10. Apply grease to an M10 x 190mm Bolt (24).
Attach the Backrest Frames (7) to the Frame (3)
with the M10 x 190mm Bolt (24), two M10
Washers (40), and an M10 Locknut (32).
Do
not overtighten the Locknut; the Backrest
Frames must pivot easily.
See step 9.
Tighten the M6 x 35mm Screws
(26).
8
7
29
26
26
32
40
7
3
24
Grease
9
10
40
29
8.
Insert two Pad Tubes (12) into the Leg Lever
(6). Slide two Foam Pads (13) onto each Pad
Tube. Then, press two Pad Caps (37) into each
Pad Tube.
6
8
12
12
37
37
37
13
13
13
13