Ricoh 4110N Operating Instructions - Page 103
Check [Bypass Size] appears, and then press the, key to select the envelope type
UPC - 026649028038
View all Ricoh 4110N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Loading Paper 1. Load envelopes until they stop, with the print side up and the sides of the flaps on the left as shown below. AUB260S 2. Slide the side guides against the edge of the envelope stack. 3. Set the envelope size and feed direction. Press the [Menu] key. 5 AUB051S The [Menu] screen appears. 4. Press the [ ] or [ ] key to display [Paper Input], and then press the [ Enter] key. 5. Check [Bypass Size] appears, and then press the [ Enter] key. 6. Press the [ ] or [ ] key to select the envelope type, and then press the [ Enter] key. 7. Press the [Online] key. The initial screen appears. • Confirm that the top of the stack is not higher than the limit mark on the side guides. 101
1.
Load envelopes until they stop, with the print side up and the sides of the flaps on the left as
shown below.
AUB260S
2.
Slide the side guides against the edge of the envelope stack.
3.
Set the envelope size and feed direction. Press the [Menu] key.
AUB051S
The [Menu] screen appears.
4.
Press the [
] or [
] key to display [Paper Input], and then press the [
Enter] key.
5.
Check [Bypass Size] appears, and then press the [
Enter] key.
6.
Press the [
] or [
] key to select the envelope type, and then press the [
Enter] key.
7.
Press the [Online] key.
The initial screen appears.
•
Confirm that the top of the stack is not higher than the limit mark on the side guides.
Loading Paper
101
5