Ricoh 4110N Operating Instructions - Page 63
IEEE 802.11b (Wireless LAN) Configuration, set the IPv4 Address, Subnet Mask, Gateway Address, DHCP
UPC - 026649028038
View all Ricoh 4110N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
IEEE 802.11b (Wireless LAN) Configuration IEEE 802.11b (Wireless LAN) Configuration Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. Setting Name Default Value Comm. Mode 802.11 Ad hoc Channel (1-13) 13 (1-11) 11 4 Trans. Speed Auto SSID blank Security Method None • To use IEEE 802.11b (Wireless LAN), set as the followings using the control panel: press the [Menu] key, and then select [Host Interface], [Network Setup], [LAN Type], and then [IEEE 802.11b]. Also, set the IPv4 Address, Subnet Mask, Gateway Address, DHCP, Frame Type (NW), and Active Protocol under the [Network Setup] menu. For details about setting items, see p.53 "Ethernet Configuration". • The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface. 1. Press the [Menu] key. The [Menu] screen appears. AUB051S 61