Ricoh 4110N Operating Instructions - Page 55
Configuration, Ethernet Configuration
UPC - 026649028038
View all Ricoh 4110N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
4. Configuration Ethernet Configuration Make the following network settings according to the network interface you are using. You can use SmartDeviceMonitor for Admin or a Web browser to make IP address-related settings in a TCP/IP-capable environment. • Configure the printer for the network using the control panel. • The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu. 4 IPv4 Settings Setting Name IPv6 Settings Frame Type (NW) Active Protocol Ethernet Speed LAN Type Value • DHCP: On • IPv4 Address: 011.022.033.044 • Subnet Mask: 000.000.000.000 • Gateway Address: 000.000.000.000 Stateless sett.: Active Auto Select • IPv4: Active • IPv6: Not Active • NetWare: Active • SMB: Active • AppleTalk: Active Auto Select Ethernet • If DHCP is in use, the IP address, subnet mask, and gateway address are all set automatically. • Make this setting only when it is necessary. See Software Guide. 53