Ricoh Aficio MP 6500 S/P Facsimile Reference - Page 48
Metric Version, Inch Version, scanned as B4 JIS Japanese Industrial Standard.
View all Ricoh Aficio MP 6500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Transmission Note ❒ There may be a difference in the size of the image when it is printed at the destination. ❒ Even if an original is correctly placed on the exposure glass or in the ADF, a 1 margin of 3 mm (0.1") around each edge of the original may not be sent. ❒ If the receiver uses paper of a smaller width than the original, the image is re- duced to fit that paper. ❒ During Immediate Transmission, the length of the scanning range can become narrower than 1200 mm (47"), depending on the resolution as well as the settings on the destination machine. ❒ The machine detects paper sizes in the following ways: • When you place an original in the ADF, an original wider than about 263 mm (10.4") is scanned as A3, 11"×17" size. An original narrower than about 230 mm (9.1") is sent as 81/2"×11" or 81/2"×14" size, and an original narrower than about 263 mm (10.4") is scanned as B4 JIS (Japanese Industrial Standard). Originals up to 1200 mm (47.2") in length can be scanned. • See the following table for sizes the machine can detect when you place an original on the exposure glass. Because the machine scans custom size documents in a standard size, part of the image may be truncated depending on the length of the document. For details about how to set custom size documents, see "Setting a Scan Size". ❖ Metric Version ❖ Inch Version × - Unable to auto detect *1 Normally a length of about 420 mm (16.5") can be scanned; however, it is only possible to specify a scanning size up to 432 mm (17"). 38