Ricoh Aficio MP 6500 S/P Facsimile Reference - Page 52
Start, Clear Modes, Specify the destination, and then press
View all Ricoh Aficio MP 6500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Transmission E Specify the destination, and then press the {Start} key. Note ❒ This stamp indicates that the original has been successfully stored in memory 1 for Memory Transmission, or successfully sent by Immediate Transmission. ❒ When the stamp starts getting lighter, replace the cartridge. ❒ If a multi-page feed or paper jam occurs, the originals are not sent properly and not stamped. If you find a page that is not stamped, send only that page again. ❒ You can have the machine select the Stamp function right after the power is turned on or the {Clear Modes} key is pressed. See "Registering a priority function using a program". ❒ You can program one of the Quick Operation keys with operations for this function. Using the Quick Operation key allows you to omit step B. ❒ A paper jam during Parallel Memory Transmission may cause the transmission to fail even if stamping is performed. ❒ You cannot turn the Stamp function on or off while an original is being scanned. Reference p.264 "Registering a priority function using a program" "Facsimile Features", General Settings Guide "Adding paper, Toner and Staples", Troubleshooting 42