Ricoh Aficio MP 6500 S/P Network Guide - Page 127
Using DHCP
View all Ricoh Aficio MP 6500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Using DHCP Using DHCP You can use the printer in a DHCP environment. You can also register the printer NetBIOS name on a WINS server when it is running. If you connect an Ethernet interface and IEEE 1394 (IPv4 over 1394) interface simultaneously, pay attention to the following: ❖ When a static IPv4 address is set for both interfaces • IPv4 Address: If interface IPv4 addresses overlap, the Ethernet interface is selected. • Subnet Mask: If interface subnet masks overlap, the Ethernet interface is selected. • Gateway Address: The selected value is applied. Make the gateway address setting inside the subnet set in the interface. If a value is beyond the range of the subnet selected by the interface, the machine operates using "0.0.0.0". ❖ When obtaining addresses from the DHCP server • IP Address, Subnet Mask: you can configure addresses assigned by a DHCP server. If IP addresses overlap or the same subnet IP addresses are selected, the effective value is assigned only to the prioritized interface. Ethernet has default interface priority. • AutoNet: A temporary IPv4 address starting with 169.254 and not used on the network, is assigned to the prioritized interface. Default interface priority is IEEE 1394 (IPv4 over 1394). • Gateway Address, DNS Server Address, and Domain Name: You can configure the addresses assigned by DHCP to the prior- itized interface. If the gateway address is be- yond the range of the subnet se- lected for the interface, the machine operates using "0.0.0.0". Ethernet has default interface priority. 4 ❖ When there are static IP addresses and addresses assigned by DHCP • IPv4 Address and subnet mask: if a static IPv4 address is the same as an address assigned by DHCP, or the static subnet mask address and the subnet mask address assigned by DHCP overlap, the machine uses the static IPv4 address interface. The interface with the DHCP setting is set by default. • Gateway Address: operates using the address entered manually. If a static address is not selected, or is set to 0.0.0.0, the interface using the address assigned by DHCP is used. Note ❒ Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS server. ❒ Supported DHCP servers are Microsoft DHCP Server included with Windows 2000 Server, Windows Server 2003, and Windows NT 4.0, and the DHCP server included with NetWare and UNIX. 119