Ricoh Aficio MP 6500 S/P Network Guide - Page 85
sntp, Configuring SNMP v3 encryption
View all Ricoh Aficio MP 6500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Remote Maintenance by telnet ❖ SNMP v3 TRAP configuration display msh> snmp v3trap sntp msh> snmp v3trap {1-5} The printer clock can be synchronized • If a number from 1-5 is entered, with a NTP server clock using Simple settings are displayed for that Network Time Protocol (SNTP). Use number only. the "sntp" command to change SNTP settings. ❖ Configuring a sending address for 2 SNMP v3 TRAP ❖ View settings msh> snmp v3trap {1-5} {ipv4|ipv6|ipx} "address" ❖ Configuring a sending protocol for SNMP v3 TRAP msh> sntp ❖ NTP server address configuration You can specify the IP address of the NTP server. msh> snmp v3trap {1-5} active {ipv4|ipv6|ipx} {on|off} ❖ Configuring a user account for SNMP v3 TRAP msh> snmp v3trap {1-5} account "account_name" • Enter an account name using up to 32 alphanumeric characters. ❖ Deleting an SNMP v3 TRAP user account msh> sntp server "IP_address" ❖ Interval configuration msh> sntp interval "polling _time" • You can specify the interval at which the printer synchronizes with the operator-specified NTP server. The default is 60 minutes. • The interval can be entered from 0, or between 16 and 10,080 minutes. msh> snmp v3trap {1-5} clear account ❖ Configuring an SNMP v3 encryption algorithm • If you set 0, the printer synchronizes with the NTP server only when you turn the printer on. After that, the printer does not synchronize with the NTP server. msh> snmp v3auth {md5|sha1} ❖ Configuring SNMP v3 encryption msh> snmp v3priv {auto|on} • Set "auto" for automatic encryp- tion configuration • Set "on" for mandatory encryp- tion configuration. ❖ Time-zone configuration msh> sntp timezone "+/hour_time" • You can specify the time difference between the printer clock and NTP server clock. The values are between -12:00 and +13:00. 77