Ricoh Aficio MP 6500 S/P Network Guide - Page 129
Precautions, Connecting a Dial-Up Router to a Network, When using NetWare (file server)
View all Ricoh Aficio MP 6500 S/P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Precautions Precautions Please pay attention to the following when using the network interface board. When configuration is necessary, follow the appropriate procedures below. Connecting a Dial-Up Router to a Network Configuring the printer with NetWare A Following the setup method de- scribed earlier in this manual, configure the file server. B Set the frame type for NetWare environment. When using NetWare (file server) Reference For more information about se- 4 If the NetWare file server and printer are on opposite sides of a router, lecting a frame type, see the General Settings Guide. packets are sent back and forth con- tinuously, possibly incurring com- Configuring the printer without munications charges. Because packet NetWare transmission is a feature of NetWare, you need to change the configuration of the router. If the network you are using does not allow you to configure the router, configure the machine instead. A When not printing, the network interface board sends packets over the network. Set NetWare to "inactive". ❖ Configuring the router Filter packets so they do not pass over the dial-up router. Reference For more information about selecting a protocol, see General Settings Guide. Note ❒ The MAC address of the filtering printer is printed on the printer configuration page. For more information about printing a configuration page, see Printer Reference. ❒ For more information about configuring the printer if the router cannot be configured, see the following instructions. 121