Ricoh P C200W Printer Languages and Interfaces Technical Reference - Page 29
PCL emulation commands by function Status Readback, Set Status Readback Location Type
View all Ricoh P C200W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Printer Control Language (PCL) emulation 29 Command / Parameters ESC*v#A -32767.0 to 32767.0 ESC*v#B -32767.0 to 32767.0 ESC*v#C -32767.0 to 32767.0 ESC*v#I # = Palette Index 0 to 2n - 1 = Palette Index ESC*v#S # = Palette Index 0 to 2n - 1 = Palette Index ESC*v#W[data] ESC*i#W[data] Function / Result Color Component One Indicates the first primary color specified by the Assign Color Index command. Color Component Two Indicates the second primary color specified by the Assign Color Index command. Color Component Three Indicates the third primary color specified by the Assign Color Index command. Assign Color Index Designates the three current color components to the specified palette index number. n represents the number of bits per index. Foreground Color Sets the foreground color to the specified index in the current palette. n represents the current palette size. Configure Image Data Creates programmable palettes. Viewing Illuminant 8, Data Designates the relative white point used in determining a viewing illuminant condition. PCL emulation commands by function (Status Readback) Command / Parameters Function / Result ESC*s#T 0-Invalid location (default) 1-Use currently selected location 2-All locations 3-Internal (resident) 4-Downloaded entity 5-Cartridge 7-User-installable flash 200-Disk Set Status Readback Location Type Sets the status location type to the specified value. Notes: • The 5 value for Cartridge may be specified. If your printer does not support font cards or cartridges, then the command is ignored. • The 7 value for user-installable flash is only valid when a flash memory is installed. • The 200 value is only valid when a hard disk is installed. ESC*s#U 0-All 1-If download, temporary; otherwise, highest priority 2-If download, permanent; otherwise, next higher priority Set Status Readback Location Unit Sets the status location unit to the specified value. The location unit is used along with the location type to identify a location for the Inquire Status Readback Entity command. Note: Depending on the location type specified, the unit value is interpreted differently.