Home » Rocketfish Manuals » Electronics Accessories » Rocketfish RF-G1501 » Manual Viewer

Rocketfish RF-G1501 User Guide

Rocketfish RF-G1501 Manual

View all Rocketfish RF-G1501 manuals

Add to My Manuals
Save this manual to your list of manuals

Rocketfish RF-G1501 manual content summary:

Rocketfish RF-G1501 | User Guide - Page 1
75" TV WALL MOUNT - FULL MOTION RF-HTVMM170C For wood-stud and concrete wall installations Safety information and specifications 2 Tools needed 2 Package contents 3 Installation instructions 5 ASSEMBLY GUIDE Before using your new product, please read these instructions to prevent any damage.
Rocketfish RF-G1501 | User Guide - Page 2
INSTRUCTIONS Overall dimensions (H × W × D): CAUTION: Do not use this 16.7 x 24.9 x 3.5 in. (425 x 632 x 90 mm) product for any purpose not Wall-mount weight: 19.4 lbs. (8.8 kg) explicitly specified by Rocketfish contact Customer Service or call a qualified contractor. Rocketfish is not
Rocketfish RF-G1501 | User Guide - Page 3
RF-HTVMM170C Package contents Make sure that you have all the hardware necessary to assemble your new TV wall mount: 1 Vertical Brackets (Qty. 2) 2 Horizontal brackets (Qty. 2) 5 Template (Qty. 1) 3 Wall plate (Qty. 1) 4 Arm (Qty. 1) Need help? Call 1-800-620-2790 (U.S. and Canada) 3
Rocketfish RF-G1501 | User Guide - Page 4
screw 4 5/16" × 2 3/4" lag screw 2 Securement screw 4 mm hex key 1 TV interface screw 2 Concrete Installation Kit CMK1 (not included) Contact customer service at 1-800-359-5520 to have these additional parts shipped directly to you. 22 4 Concrete anchors (Fischer UX10 x 60R) 1 2 3 4in
Rocketfish RF-G1501 | User Guide - Page 5
RF-HTVMM170C Installation instructions Step 1 - Determine whether your TV has a flat back or an has a table-top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Temporarily lay the vertical brackets (1) on the back of your TV. 4 Align the screw holes
Rocketfish RF-G1501 | User Guide - Page 6
damage, make sure that there are adequate threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using
Rocketfish RF-G1501 | User Guide - Page 7
RF-HTVMM170C STEP 3 - Option 1: Attaching the vertical brackets to TVs with a flat back 1 Align the holes you noted on the vertical brackets (1) with the screw holes
Rocketfish RF-G1501 | User Guide - Page 8
STEP 3 - Option 2: Attaching the vertical brackets to TVs with irregular or obstructed backs 1 Place the 2.5 mm (7) or 22 mm spacers (8) over the screw holes on the back of the TV. 2 Align the vertical brackets (1) over the spacers (7 or 8), then place the washers (6) over the holes in the vertical
Rocketfish RF-G1501 | User Guide - Page 9
RF-HTVMM170C STEP 4 - Attaching the horizontal brackets 1 Slide the horizontal brackets (2) through the slots in the vertical brackets (1), as shown below. Make sure that the brackets
Rocketfish RF-G1501 | User Guide - Page 10
STEP 5 - Determine wall-mount location NOTE: • For more detailed information on determining where to drill your holes, visit our online height-finder at: http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder • Your TV should be high enough so your eyes are level with the middle of the
Rocketfish RF-G1501 | User Guide - Page 11
RF-HTVMM170C STEP 6 - Option 1: Installing on a wood stud wall Note: Drywall covering the wall must not exceed 5/8" (16 mm). 1 Locate the stud. Verify the center of
Rocketfish RF-G1501 | User Guide - Page 12
5 Align the wall plate (3) with the pilot holes, insert the lag screws (18) through the holes in the wall plate assembly, then tighten the lag screws only until they are firm against the wall plate assembly. CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag screws (
Rocketfish RF-G1501 | User Guide - Page 13
RF-HTVMM170C STEP 6 - Option 2: Installing on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into the mortar between
Rocketfish RF-G1501 | User Guide - Page 14
4 Align the wall plate (3) with the anchors, insert the lag screws (18) through the holes in the wall plate assembly, then tighten the lag screws only until they are firm against the wall plate. CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag screws (18). You'll
Rocketfish RF-G1501 | User Guide - Page 15
RF-HTVMM170C STEP 7 - Attach the arm to the wall plate 1 Hang the arm (4) onto the wall plate (3) by first hooking the top support, then lowering the bottom of the arm into place. 2 Lock the arm (4) to the wall plate (3) with the securement screws (19), using the hex key (
Rocketfish RF-G1501 | User Guide - Page 16
the arm (4) so the elbow is bent 90 degrees and pressed against the wall. 2 Hang the TV onto the arm (4) by first hooking the top support, then lowering the bottom of the TV into place. 3 Lock the TV to the arm (4) with the TV interface screws (21). IMPORTANT: The two TV
Rocketfish RF-G1501 | User Guide - Page 17
RF-HTVMM170C STEP 9 - Making adjustments and managing cables 1 The following adjustments are available by loosening the tilt control knob. NOTE: Once your TV is in place,
Rocketfish RF-G1501 | User Guide - Page 18
plate assembly, disconnect all cables, then reverse the procedures in Step 8. IMPORTANT: Your TV is heavy. You may need assistance with this step. For customer service, call: 1-800-620-2790 (U.S. and Canada) 18 Need help? Call 1-800-620-2790 (U.S. and Canada)
Rocketfish RF-G1501 | User Guide - Page 19
Part # 6907-002124 01 www.rocketfishproducts.com (800) 620-2790 (U.S. and Canada) ROCKETFISH is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN