Rocketfish RF-G1501 User Guide - Page 11
Option 1: Installing on a wood stud wall, STEP 6
View all Rocketfish RF-G1501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
RF-HTVMM170C STEP 6 - Option 1: Installing on a wood stud wall Note: Drywall covering the wall must not exceed 5/8" (16 mm). 1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder. 2 Make sure that the distance between the studs is 16 inches. 3 Align the center of the wall plate template (5) at the height you determined in the previous step and make sure that it is level. Tape the wall plate template to the wall, then use a pencil to mark the four lag screw hole locations of the stud centers. Remove the wall plate template. 16 inches 4 Drill four pilot holes to a depth of 2 3/4 in. (69 mm) using a 7/32 in. (5.5 mm) diameter drill bit. Note: Minimum wood stud size: Common 2 x 4 in. (51 x 102 mm). Nominal 1.5 x 3.5 in. (38 x 89 mm) 2 3/4 in (69 mm) 7/32 in (5.5 mm) Need help? Call 1-800-620-2790 (U.S. and Canada) 11