Rocketfish RF-G1501 User Guide - Page 13
Option 2: Installing on a solid concrete or concrete, block wall
View all Rocketfish RF-G1501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
RF-HTVMM170C STEP 6 - Option 2: Installing on a solid concrete or concrete block wall CAUTION: To prevent property damage or personal injury, never drill into the mortar between the blocks. Mount wall plate directly onto the concrete surface. Note: Minimum solid concrete thickness: 8 in (203 mm). Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm). 1 Align the center of the wall plate template (5) at the height you determined in the previous step and make sure that it is level. Tape the wall plate template to the wall, then use a pencil to mark the four lag screw hole locations. Remove the wall plate template. 2 Drill pilot holes to a depth of 3 in. (76 mm) using a 3/8 in. (10 mm) diameter masonry drill bit. 3 in (76 mm) 3/8 in (10 mm) 3 Insert the concrete wall anchors (22) (refer to "Concrete Installation Kit CMK1 (not included)" on page 4) into the pilot holes and use a hammer to make sure that the anchors are flush with the concrete surface. Need help? Call 1-800-620-2790 (U.S. and Canada) 13