Rocketfish RF-G1502 User Manual - Page 12
Option 1: Attaching the mounting hardware to, TVs with a flat back, STEP 5
View all Rocketfish RF-G1502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back 1 Place the washers (D) over the holes in the TV bracket (A) that align with the screw holes on the back of your TV, then insert the screws (B) through the washers and the TV bracket. NOTE: If the hole pattern on your TV is 75 mm x 75 mm, the washers (D) will not fit, so do not use them. 2 Tighten all screws carefully until snug. Do not overtighten. Note: No washers used with 75 mm x 75 mm hole pattern. You'll need Screws B (4) Washers D (4) TV bracket (A) Phillips screwdriver 12 Need help? Call 1-800-620-2790 (U.S. and Canada)
12
Need help? Call 1-800-620-2790 (U.S. and Canada)
STEP 5 -
Option 1: Attaching the mounting hardware to
TVs with a flat back
1
Place the washers (
D
) over the holes in the TV bracket (
A
) that align with the
screw holes on the back of your TV, then insert the screws (
B
) through the
washers and the TV bracket.
NOTE
: If the hole pattern on your TV is 75 mm x 75 mm, the washers (
D
) will not fit, so
do not use them.
2
Tighten all screws carefully until snug. Do not overtighten.
You’ll need
Note
: No washers used with
75 mm x 75 mm hole pattern.
Washers
D
(4)
Screws
B
(4)
Phillips screwdriver
TV bracket (
A
)