Ryobi P530 English Manual - Page 13

Using Circle Cutter, Caution

Get Ryobi P530 PDF manuals and user guides View all Ryobi P530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

OPERATION USING CIRCLE CUTTER See Figure 9.  Assemble circle cutter if necessary. Refer to "Assembling Circle Cutter" in this manual.  Attach circle cutter to speed saw if necessary. Refer to "Attaching Circle Cutter" in this manual.  Adjust depth of cut if necessary. Refer to "Adjusting Depth Of Cut" in this manual.  Loosen pivot point knob.  Move pivot point knob to desired diameter dimension.  Tighten pivot point knob.  Start speed saw.  Cut a pilot hole in the center of the intended circle.  Line up pivot point knob with the lead hole.  Begin cut, applying moderate, steady pressure.  Hold the speed saw firmly with one hand and the handle with the other. CAUTION: Too much force causes heat build up, which can shorten the life of the bit.  Work in a clockwise direction, continuing back to the starting position.  Stop speed saw. Fig. 9 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
13
USING CIRCLE CUTTER
See Figure 9.
Assemble circle cutter if necessary. Refer to “Assembling
Circle Cutter” in this manual.
Attach circle cutter to speed saw if necessary. Refer to
“Attaching Circle Cutter” in this manual.
Adjust depth of cut if necessary. Refer to “Adjusting
Depth Of Cut” in this manual.
Loosen pivot point knob.
Move pivot point knob to desired diameter dimension.
Tighten pivot point knob.
Start speed saw.
Cut a pilot hole in the center of the intended circle.
Line up pivot point knob with the lead hole.
Begin cut, applying moderate, steady pressure.
Hold the speed saw firmly with one hand and the handle
with the other.
CAUTION:
Too much force causes heat build up, which can shorten
the life of the bit.
Work in a clockwise direction, continuing back to the
starting position.
Stop speed saw.
Fig. 9
OPERATION