Ryobi P530 English Manual - Page 9

ASSEMBLY UNPACKING This product has been shipped completely assembled. n Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. n Inspect the tool carefully to make sure no breakage or damage occurred during shipping. n Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Speed Saw with Depth Adjustment Ring Bits (2) Collet Collet Adaptor Circle Cutter Wrench Lanyard (not included in combo) Operator's Manual REMOVING DEPTH ADJUSTMENT RING See Figure 2.  Remove battery pack from speed saw.  Place wrench in tab on depth adjustment ring.  Depress spring-loaded tab.  Lift depth adjustment ring off tool. ASSEMBLING CIRCLE CUTTER See Figure 3.  Remove battery pack from speed saw.  Attach handle with screw provided.  Attach pivot point knob with nut provided. TAB WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WRENCH SCREW NUT Fig. 2 WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. HANDLE PIVOT POINT KNOB Fig. 3