Ryobi P600 English Manual
Ryobi P600 Manual
 |
View all Ryobi P600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Ryobi P600 manual content summary:
- Ryobi P600 | English Manual - Page 1
OPERATOR'S MANUAL 18 volt trimmer P600 batterIES and chargerS sold Separately Your trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING - Ryobi P600 | English Manual - Page 2
10 Operation...11-19 Maintenance...20 Accessories...21 Parts Ordering / Service...22 INTRODUCTION This tool has many features for making after date of purchase, you may either request service under this warranty or you may exchange any RYOBI® power tool which does not work properly due - Ryobi P600 | English Manual - Page 3
easier to control. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. Use only accessories that are recommended - Ryobi P600 | English Manual - Page 4
servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions when not using your battery tool or when changing accessories. Following this rule will reduce the risk of - Ryobi P600 | English Manual - Page 5
charger, read all instructions and cautionary markings in this manual, on battery charger, internal parts. Do not let gasoline, oils, petroleum-based products, etc. come in contact with plastic parts. . Take it to an authorized serviceman when service or repair is required. Incorrect reassembly may - Ryobi P600 | English Manual - Page 6
per minute Wet Conditions Alert Do not expose to rain or use in damp locations. Read The Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye Protection Always wear safety goggles or safety glasses with side shields, or - Ryobi P600 | English Manual - Page 7
servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing - Ryobi P600 | English Manual - Page 8
SPECIFICATIONS Motor...18 Volt DC Switch...Single Speed No Load Speed...28,000/min. Collet Size...1/4 in. Charger Input...120 V, 60 Hz, AC only Charge Rate...1 hour SWITCH MOTOR HOUSING SPINDLE LOCK button WRENCH BASE DEPTH OF CUT SCALE DEPTH ADJUSTMENT LATCH LAMINATE SUB-BASE Fig. 1 - Ryobi P600 | English Manual - Page 9
lock button allows quick bit changes. DEPTH OF CUT SCALE Your trimmer has an adjustable depth of cut scale on each side of the tool. LAMINATE Sub-base The sub-base gives the operator greater visibility of the workpiece during laminate trimming operations. OPTIONAL TRIM ROUTER SUB-BASE (not included - Ryobi P600 | English Manual - Page 10
nut is loose. If changing bits, the bit will easily slip from the collet after loosening the collet nut. n Turn the switch to OFF and remove the battery pack from the trimmer. n Place the trimmer upside down on a workbench. n To remove the laminate sub-base assembly, open the depth adjustment latch - Ryobi P600 | English Manual - Page 11
trimming of laminates and wood veneer When used with the optional woodworking sub-base battery pack and charger to your nearest Ryobi Authorized Service Center for electrical check. Charge charging. This is normal and does not indicate a problem. Do not place the charger and battery pack in - Ryobi P600 | English Manual - Page 12
Service Center for electrical check. installing the BATTERY PACK See Figure 5. NOTE: The battery pack is shipped in a low charge condition. Therefore, it must be charged prior to use. Refer to page 11, "CHARGING THE BATTERY PACK" for charging instructions. n Place the battery pack in the trimmer - Ryobi P600 | English Manual - Page 13
grip positions, remove the laminate sub-base assembly (See "Installing/Removing Trimming Bits"). Position the base for right- or left-handed operation. NOTE: Replace the base before using the trimmer. Do not attempt to operate the trimmer without the base installed. WARNING: Avoid hand positions - Ryobi P600 | English Manual - Page 14
sharp edges of the bit continuously biting straight into new (uncut) wood. trim end grains first trimmer feed direction bit rotation trimmer feed direction GUIDE OUTSIDE bit rotation Fig. 8 THRUST ROTATION GUIDE GUIDE INSIDE ROTATION GUIDE FEED FEED THRUST Fig. 9 trimmer feed direction 14 - Ryobi P600 | English Manual - Page 15
a 1/16 in. change in depth setting. Indicator points are located on the base. n Completely close the depth adjustment latch. WARNING: Avoid open area of trimmer base. Serious personal injury will result from contact with a rotating bit. NOTE: To make deeper cuts, it is necessary to make as many - Ryobi P600 | English Manual - Page 16
OPERATION OPTIONAL woodworking Sub-base Turn the P600 laminate trimmer into a trim router with the optional woodworking sub-base, Ryobi Part No. 200334001. The woodworking sub-base accessory with handles is convenient when routing 4 in., 5 in., or 6 in. circular grooves. It can also be used when - Ryobi P600 | English Manual - Page 17
groove on the workpiece with the centerline on the woodworking sub-base accessory. Then measure from the centerline on the woodworking sub-base accessory to the guiding portion of the straight guide. Tighten the knob on the straight guide securely. n Using "C" clamps and a board to act as the - Ryobi P600 | English Manual - Page 18
workpiece wood or laminate before you begin. Always grasp and hold the trimmer firmly when trimming. When using the largest recommended straight bit (1/4 in.) in overheat the bit. Dull bits can also contribute to scraping and burning. It is more difficult to control a trimmer when the bit is scraping - Ryobi P600 | English Manual - Page 19
depth of cut can lessen the possibility of damage to the trimmer motor and bit. A deeper cut requires a slower feed than a shallow one. Making difficult to guide and control the bit as desired. It is necessary that you do not exceed 1/8 in. depth of cut in a single pass, regardless of the bit size - Ryobi P600 | English Manual - Page 20
or destroy plastic which may result in serious personal injury. Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a Ryobi Authorized Service Center. adjusting tension on the depth adjustment latch With use, the depth - Ryobi P600 | English Manual - Page 21
Look for these accessories at the service center: Woodworking Sub-base ...200334001 WARNING: Current attachments and accessories available for use with this tool are listed above. Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments - Ryobi P600 | English Manual - Page 22
ordering repair parts, always give the following information: • MODEL NUMBER P600 • SERIAL NUMBER Ryobi® is a registered trademark of Ryobi Limited used under license. ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com 983000-600 08
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
OPERATOR’S MANUAL
18 VOLT TRIMMER
P600
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, and opera-
tor safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
BATTERIES AND CHARGERS
SOLD SEPARATELY