Ryobi TC400 Operation Manual - Page 6

SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. Some of the following symbols may be used on this product . Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator's Manual To reduce the risk of injury, user must read and understand operator's manual before using this product. Eye, Ear, & Breathing Protection Wear eye, hearing, and breathing protection when operating this equipment. Wet Conditions Alert Do not expose to rain or use in damp locations. No Hands Symbol Failure to keep your hands away from the cutting wheel will result in serious personal injury. A Hz W min no .../min Electrocution Amperes Hertz Watt Minutes Alternating Current No Load Speed Class II Construction Per Minute Failure to properly ground can result in electrocution. Current Frequency (cycles per second) Power Time Type of current Rotational speed, at no load Double-insulated construction Revolutions, strokes, surface speed, orbits etc., per minute 6 - English