Ryobi YN600A Operation Manual - Page 7

FEATURES PRODUCT SPECIFICATIONS Motor 12 Volt DC High Pressure Hose Length 24 in. Low Pressure Hose Length 9 in. KNOW YOUR Inflator See Figure 1, page 12. The safe use of this product requires an understanding of the information on the inflator and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 12V Adaptor This connector is used to power the inflator using appropriate 12V DC power sources. NOTE: The inflator will not function unless connected to a 12V DC power source. 180º ROTATING WORKLIGHT Your inflator has a worklight that can be rotated 180° back and forth. ACCessory Compartment The inflator features a storage space for inflator accessories. Nozzles Nozzles provided with the inflator can be used in a variety of applications. Built-In Hose Wrap The inflator has a built-in hose wrap that allows easy storage of the high pressure hose. Carry Handle The inflator has a carry handle for easy transport. Cord Retainer The cord wrap keeps the cord neatly out of the way for storage. NOTE: To reduce cord slack, press excess cord into grooves in the cord retainer. Gauge Analog (PSI, KG/CM2, and BAR) Maximum Pressure..... 150 PSI, 10.34 BAR, 10.55 KG/CM2 Low Pressure Deflator inlet Place the low pressure hose in the deflator inlet to quickly deflate inflated objects. HIGH PRESSURE air HOSE The high pressure hose can easily inflate high pressure items like motorcycle, car, and bicycle tires. HVLP Flexi Hose with two HVLP nozzles The high volume/low pressure air hose can be used to inflate or deflate low pressure items. Inflator on/off switch Depress the inflator on/off switch on to the on position to power the inflator on. To turn the inflator off, depress the switch to the off position. Low Pressure inflator outlet Place the low pressure hose in the inflator outlet to inflate low pressure items like air mattresses, rafts and floats PreSET Pressure When the preset pressure feature is used, the inflator will automatically stop inflating once a predetermined pressure has been reached. NOTE: The preset pressure feature can only be used when inflating high pressure items. Pressure Gauge The pressure gauge measures air pressure from 0 to 150 psi. Worklight on/off switch Depress worklight on/off switch to turn light on and off. 7 - English