Samsung 1200NF User Manual (user Manual) (ver.1.0) (English) - Page 11
Automatic Save, Direct-Access Feature
View all Samsung 1200NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Adjusting Your Monitor Automatic Save Whenever you open the on screen display and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency from your computer. The monitor can save adjustments for up to 10 user modes. It has 8 factory preset or preload modes, one for each signal frequency as listed in Display Modes on page 28. If you have made no adjustments, the on-screen menu disappears and the monitor does not save anything. To exit without saving the changes you have made, press the EXIT ( ) button before the 3 seconds elapse. Direct-Access Feature The feature described on this page and the next page can be accessed quickly, at the touch of one button. When you finish making adjustments to a feature, push the EXIT ( ) button to turn off the menu or allow the OSD to time out and disappear automatically Information Information Frequency Range: H: 30 - 121kHz V: 50 - 185Hz Recommended Timing: 1600x1200 / 85Hz Serial Number: 37k/70 640x350 The Information on this screen shows available horizontal and vertical frequencies and display resolution. 1 With the menu off, push the i button once to see information about your monitor. The current Horizontal/Vertical frequencies received from the computer or video board is displayed along the bottom. 2 Push the i button once more to see the user defined timing mode. 3 Scroll down with the button to display the factory preset timings. Note: These screens do not allow any changes to the settings; they are for information only. English 9