Samsung 203B Service Manual - Page 7
Rear
UPC - 729507703824
View all Samsung 203B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
10 Operating Instructions and Installation 4. Enter button / Source button Activates a highlighted menu item. / Push the 'SOURCE', then selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the left upper side of the screen displaying the current mode -- analog or digital input signal.) Note : If you select the digital mode, you must connect your monitor to the graphic card's port using the DVI cable. 5. Auto button When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) 6. Power button Use this button for turn the monitor on and off. 10-2 Rear (The configuration at the back of the monitor may vary from product to product.) 1. POWER S/W : Switch the monitor on and off. 2. POWER IN : Power cord, plugs into monitor and wall receptacle. 10-2