Samsung 320P-BLACK User Manual (user Manual) (ver.1.0) (English) - Page 26
COMPONENT AUDIO IN [L-AUDIO-R], BNC/COMPONENT IN - P, Connecting to a Camcorder, AUDIO IN [L-AUDIO-R]
View all Samsung 320P-BLACK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1. Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the Monitor and the AUDIO OUT jacks on the DVD player. 2. Connect a Component cable between the BNC/COMPONENT IN - PR, Y, PB port on the Monitor and the PR, Y, PB jacks on the DVD player. A component cable is optional. 3. Select Component for the connection to a DVD player using the Source button on the front of the monitor or on the remote control. 4. Then, start the DVD Player with a DVD disc inserted. For an explanation of Component video, consult your DVD manual. 4. Connecting to a Camcorder 1. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the Monitor. 2. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the Monitor. 3. Select AV for the Camcorder connection using the Source button on the front of the monitor or on the remote control. 4. Then, start the Camcorders with a tape inserted. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. 5. Connecting to a DTV Set Top Box The connections for a typical Set Top Box are shown below.