Samsung CL-34M9P User Manual (user Manual) (ver.1.0) (English) - Page 40

SPECIAL FEATURES Setting Up Your Remote Control to Operate Your Cable Box 1 Turn off your cable box. 2 On your Samsung remote control, press SET. 3 Press the CABLE button on the top right of your remote control. 4 Enter both digits of the cable box code listed below for your brand of cable box. w w The remote control has three "modes": "TV," "VCR," and "CABLE". Press the "CABLE" button to switch the remote control to the "Cable" mode. Make sure you enter both digits of the code, even if the first digit is a "0." (If more than one code listed, try the first one.) 5 Press POWER. Your cable box should turn on. If your cable box turns on, your remote control is now "set up" correctly. w If your cable box does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for your particular brand of cable box. (If no other codes are listed, try each cable box code, 00 through 35.) 6 Once your remote control is set up, press the CABLE button any time you want to use the remote to operate your cable box. w When your remote control is in the "CABLE" mode, the volume buttons still control your TV's volume. Also, the VCR control buttons (PLAY, PAUSE, etc.) will still operate your VCR. Cable Box Codes ABC 0, 07, 09, 12 Antronix 26 Archer 26 Comtronics 18 Eagle Comtronics 18 Eastern 01 Gemini 11 General Instruments 07 Hamlin 06, 14, 30, 32 Hitachi 07 Jerrold 02, 07, 10, 11, 19, 23 Memorex 00 Oak 04, 13, 28 Panasonic 15, 24 4.3 CHAPTER FOUR: SPECIAL FEATURES Paragon Pioneer Pulsar RCA Realistic Regal Regency Samsung Scientific Atlanta Signal Signature SL Marx Sprucer 00 16, 25, 31 00 15 26 14, 30, 32, 34 01 18, 25 03, 05, 12, 33 18 07 18 15, 35 Starcom Stargate Tandy TeleCaption Texscan Tocom Toshiba Unika United Artists United Cable Universal Viewstar Zenith 02, 11, 19, 23 11, 18 29 27 22 08, 09, 21 00 26 04 02 26 29 00, 20