Samsung CLP-310N Service Manual - Page 69
e Maintenance
View all Samsung CLP-310N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Alignment & Troubleshooting 4.1.6.3(e) Maintenance Item Fuser Transfer FCF Pick Up Roll SCF Pick Up Roll ITB Discription When "select" key is pushed, "Initialized" message will be displayed. When "Upper Level" is pushed, "Off" message is disappeared. When "select" key is pushed, "Initialized" message will be displayed. When "Upper Level" is pushed, "Off" message is disappeared. When "select" key is pushed, "Initialized" message will be displayed. When "Upper Level" is pushed, "Off" message is disappeared. When "select" key is pushed, "Initialized" message will be displayed. When "Upper Level" is pushed, "Off" message is disappeared. When "select" key is pushed, "Initialized" message will be displayed. When "Upper Level" is pushed, "Off" message is disappeared. 4.1.6.3(e) Maintenance ĶPaper Empty / Paper Mismatch - Load specified paper in the tray 1 • Paper does not exist in the tray1 • Load Paper, When you still want to continue printing - Paper mismatch in the tray 1 • Paper is mismatched • Press stop key for a while, When you still want to continue printing ĶCover Open - Cover Open • Cover is opened • Close the door, When you still want to continue printing ĶWaster Tank Full or not installed - Waste Tank Full • Toner of Waste toner box is full • Empty or Insert the waste toner box ĶPaper Jam - Paper Jam at the tray1 • Paper is not picked up • Cover Open /Close, When you still want to continue printing - Paper Jam inside printer • There is a paper inside printer • After cover Open , Paper must be removed, and then close the cover Service Manual 4-15 Samsung Electronics