Samsung CS-29M20SSQ User Manual (user Manual) (ver.1.0) (English) - Page 18
Connecting a Second VCR to Record from the TV, Connecting a Camcorder
View all Samsung CS-29M20SSQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 Connect a set of audio cables between the "AV OUT (R, L)" jacks on the TV and the AUDIO IN jacks on the VCR. (The VCR input jacks might be either on the front or rear of the VCR.) 2 Connect a video cable between the "AV OUT (VIDEO)" jack on the TV and the VIDEO IN jack on the VCR. Refer to your VCR's instructions for more information about how to record using this kind of connection. TV Rear Panel Audio Cable 1 2 From Cable Video Cable Coaxial Cable VCR Rear Panel From Antenna Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV. They allow you to view the Camcorder tapes without using a VCR. • Please be sure to match the color coded input terminals and cable jacks. 1 Locate the A/V output jacks on the Camcorder. They are usually found on the side or rear of the Camcorder. 2 Connect a set of audio cables between the "AV IN 2 (R, L)" jacks on the TV and the AUDIO OUT jacks on the Camcorder. If you have mono Camcorder, connect L(mono) to Camcorder audio out using only one audio cable. TV Side Panel S-Video Cable 3 OR Camcorder 3 Video Cable 3 Connect a video or S-video cable between the Audio Cable 2 "AV IN 2 (VIDEO)" (or "S-VIDEO") jack on the TV and the VIDEO OUT jacks on the Camcorder. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your Camcorder is stereo, you need to connect a set of two cables. • This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different. English - 18